4ft (1.2m) 20W LED T8 LED Tube 6000K CCT Daylight Frosted Cover
tForce LED 1.2m 20W T8 Tube is a perfect alternative to using traditional 1.2m 45W T8 Fluorescent tube
- Refrigeration house
- Advertising lamp house
- Humidity occasion
Quick, simple and safe replacement
- Low maintenance costs thanks to long lifetime
- Energy savings of up to 75% compared to traditional T8 fluorescent tube
- Instant-on light and low heat, therefore ideally suitable in combination with sensor technology
- LED tubes have no flickering or interference
- Maximum resistance to switching loads
- Correct operation even at low temperatures
- The frosted plastic cover helps to dissipate light and improve appearance
- Mercury-free and RoHS compliant
- Certification: CE & RoHS
- LED alternative to classic T8 fluorescent lamps in CCG luminaires
- Uniform illumination
- Wide beam angle: 270°
- Integrated ECG with high power factor
- Mercury-free and RoHS compliant
- Nominal wattage: 20W
- Nominal voltage: 100-240V
- Operating frequency: 50/60 Hz
- Type of current: AC
- Colour temperature: 6000K
- Luminous flux: 2200lm
- Beam angle: 270°
- Ambient temperature Range: -20℃-45℃
- Colour rendering index (Ra): 80
- Diameter: L1200mm x φ26mm
- Product weight: 300g
- Base (Standard designation): G13
- Material: Full PC Cover
- Cover type: Frosted
- Length of end cap: 30mm
- Net weight: 300g
- Capacitor: Chemi-con
- EMC LVD Approval
LED T8 tube lights do not require the use of either a ballast (optional) or starter, allowing you to save even more energy and ensuring longer lifespan. Please simply disconnect or bypass the ballast during installation to install our LED replacements.
You should not use an LED tube with an electronic ballast. Remove or bypass the electronic ballast BEFORE installation, to avoid damage to the LED tube. The preheat / starter lamp should be removed when used with an LED tube.
For a single tube, the magnetic ballasts do not need to be removed. If the installation has multiple tubes, then the ballast must be removed. For maximum energy saving, it is recommended to always remove the ballast. The preheat / starter lamp should be removed when used with an LED tube.
Before installation, please make sure the power is turned OFF.
We recommend when replacing a traditional fluorescent lamp for a LED T8 lamp, the existing control gear should be disconnected and rewiring of the internal circuit maybe required. This should only be carried out by a qualified electrical engineer.
|Operating Frequency||50/60 Hz|
|Type of Current||AC|
|Beam Angle||270 degree|
|Colour Rendering Index||80 Ra|
|Average lifetime||50,000 hours|
Thank you for shopping with tForce Lighting Ltd www.tforceled.co.uk
tForce Lighting Ltd only off the highest quality products. Your order is important to us and we make every effort to ensure products arrive on time and in excellent condition. Please take a moment to review our shipping policy to be informed of how and when your order will ship.
We are unable to post items to other countries outside European Union. Please ask for the International postage rates before you order.
Orders placed by midday GMT are normally processed and shipped within same day (excludes weekends and holidays).
We use Royal Mail, Interlink Express, DPD and UPS to ship our orders. Pallet orders can be arranged. All shipments over £50 or more than 5 items are trackable and insured. If your order is not delivered as promised, we can issue a replacement or refund to you as long as we are informed within 14 days.
UK – Standard Delivery (2-3 days delivery time)
UK – Express (Next Working Day – order must be received before 12:00 GMT)
EU – Standard Signed or Tracked (up to 5 days delivery time)
Shipping charges vary depending on the package size, weight, destination and shipping method.
International Shipping Rates are calculated based on a number of factors, including desired service level, the weight of the item, and the cost of shipping, handling, and customs clearance. If you require specific shipping methods please Contact Us.
Summary shipping rates:
UK - Standard
Orders under £75.00 shipping charged at £5.00
Orders £75.00 and over shipping is included
UK - Express
Orders charged at £9.99
EU – Austria, Belgium, Denmark, France, Germany, Luxembourg, Netherlands, Rep. Ireland,
Shipping charged at £15.00
Free shipping and/or other shipping promotions do not apply to oversized packages. Additional shipping charges will be added to all orders containing oversized products at the time of processing.
The maximum size and weight limits for sending items within the UK are as follows:
• Maximum weight: 30kg
• Maximum length: 1.5 metres
• Maximum combined length and girth 3 metres
There is no maximum multiple-item consignment weight limit for any UK service.
Our Express service allows for the following size and weight restrictions:
• Individual parcel limit 30kg with no limit for multi-item consignments
• Maximum parcel length 1.5m and 5m maximum length and girth combined
tForce Lighting Ltd reserves the right to change prices at any time. Purchase prices are final at the date of purchase.
tForce Lighting Ltd make every attempt to process orders as quickly as possible. Once an order is paid for and enters our system, it cannot be cancelled or modified. Standard Distance Trading Returns and Exchanges Policy applies to all orders.
No liability will be accepted by tForce Lighting Ltd for any failure or delay in performance which is wholly or partially due to an Act of God, War, Fire, Explosion, Riot, Civil Commotion, Restriction by Government or other competent authority, Strikes, Lock Outs, Failure in supplies or to any cause whatsoever beyond our control.
Sales from this web site to individuals (not businesses) are covered by the Consumer Protection (Distance Selling) Regulations 2000 (UK Law Directive 97/7/EC), which protect you by providing a 7 working day cooling off period after the product has been delivered. We increase this period to 14 days (including weekends) on a voluntary basis and offer this returns period to businesses and individuals alike. The 14 day return period starts the day after delivery.
It is only when we have dispatched the goods to you that we have a binding contract. We have the right to refuse at our discretion to supply any goods ordered and refund any payment made.
Should you wish to cancel an order you have the right to receive a refund within 30 days of cancellation. Refunds will be made to the card used to pay for the goods. Refunds are usually processed within 14 days of the goods being returned safely.
The goods/packaging must be unmarked and free from blemishes and returned in a saleable condition.
Products that have been specially ordered, adapted or customised for you cannot be returned.
Any accompanying products ordered specifically for use with the product must be returned at the same time.
We strive to supply goods in excellent condition. We will repair or replace (for free) any item found defective or damaged before delivery.
If you do wish to cancel or return an order you must contact us in writing and obtain a Returns Authorisation code. Please supply the following information when contact us:
- Your full contact details
- Details of the product(s) that you wish to return
- The reason for return
- Our receipt number
- Delivery note number
If you return an item without this code clearly marked on the packaging we cannot replace it or refund any money. Please pack the relevant items securely, write your personalised return authorisation code on the outside of the parcel and send it to us so that we receive it within 14 days after the day you received the item.
After 14 days, commencing the day after you received the goods we are unable to accept returns.
The Customer will be responsible for the safe return of the goods. Goods must be returned as new or in the same condition that they were received. There should be no damage, all parts, items should be returned, all packaging must be included and the packaging must not be defaced in any manner otherwise a 25% refund fee may apply.
We do not refund carriage charges applied to the initial order, neither do we pay for the cost of returning the items to us, unless faulty or incorrectly picked goods were supplied. Please do not sign or accept any goods until unpacked and checked in full. Only sign if you are satisfied with the condition of your purchase. Items which have been signed for are deemed to be in good condition.
We cannot accept return of products which are damaged after delivery.
Please note that all returns must be received by us within 7 days of us issuing a returns authorization code.
We use eKomi which is an independent review company who monitor the happiness of our customers in regard to their shopping experience. This not only allows us to see how we are doing in terms of delivering a fantastic level of service to our customers but also means that we are more transparent.
Nothing to say, the tube provides very wide lighting beam angle. The tube is still working very good and stable.
I would like to strongly recommand the product to friends because it is good quality .
These 20 watt 4 foot T8 LED Retrofit Tube Light Bulbs can be installed easily in the existing fluorescent fixtures. And it helps to save the energy useage.
I love this LED light tube. I bough 4 tubes for my utility room. Cool running with great daylight light. Super wide beam angle very good for my room. The tubes have been working for 2 months, so far all tubes are fine.
Straight forward to install in my office. Produces an immediate bright light, instant start, very similar to natural daylight. After two weeks of use I can say I am very pleased with it.
If you use florescent tubes in your shop or workplace, you got to try these out. Up till now, I was making my own LED replacement lighting but have recently replaced my office and part of my shop with LED Tube lighting. No more ballast buzzing and excess energy use. The lighting is soooo much better and brighter. The install instructions are a bit confusing but once you understand the process its easy easy.
I replaced 10 units T8 fluorescents in my office with these. I started with just one to make sure they worked and that I would be happy with the light. The light is great, brighter than the fluorescents and very consistent. They definitely did take a little work to install and if you aren't comfortable cutting a wire then these aren't for you. I just cut out the ballast and reconnected the wires. The first one I did took about 15 minutes. The others took about 5 minutes each. It's good if you have a couple of wire nuts to join the wires back together safely. So, if you are at all handy and want some really beautiful light (and a cool conversation piece too) then go for it!
These are bright! Thinking about putting a table underneath so I can work on my tan! Seriously though, great price and awesome lights, rewiring the fixture took all of 5 minutes. Going to be ordering more for the garage and downstairs in my computer room. I would recommend these to anyone.
I am only a couple days using this tube but pleased so far by performance. I bought one to test and am satisfied enough to put 3 more in the cart. I was concerned about heat but not a problem. Price is good compare to other online suppliers. Very wide beam angle!
I bought the four pack 20 watt 4 foot T8 LED tube lights from tforceled.co.uk, and installed them in about twenty minutes. When I turned them on, boy they were a lot brighter than my old T-12 bulbs that they replaced. I replaced the original lights because the original ballast burned out after only three months of use. I really like the Daylight colour output of these LED's better than greenish colour output of the fluorescent tubes that it replaced.
These were easy to install and when we switched them on the brightness was amazing! Have them fitted in the utility room & garages.
I have to admit that these tubes are expensive; however, once you get rid of balasts and flickering / annoying fluorescent tubes you'll be proud not only of your energy / money savings, but also extremely pleased with the quality of the light you get. The beauty of these tubes is that, after you make a few simple changes to the wiring, they will work with the fixtures you already have. In addition to this, the tubes generate very little heat, so your A/C units will thank you at the end of the month
After carefully reading the instructions and re-wiring my aquarium fluorescent light fixture, I installed the LED Tube Light and was immediately impressed with the brightness. It is as bright or brighter than the fluorescent tube being replaced. The old fluorescent bulb was putting out too much heat for the aquarium in the summer and I had to leave the lids open to help the aquarium stay cool. The LED Tube Light practically puts out no heat. The live plants in the aquarium are doing just as well under the LED light as they did under the fluorescent light.
And there was light, bright cool white light, absolutely brilliant. I bought one to see how good it was . . . I'm now buying another one, because it is so good
This is a very cool looking T8 replacement unit. This tube has a heavy-duty heat sink compare to other wide beam tubes. It looks and feels like a very high quality unit. I have been installed 8 units in my office for 4 weeks, so far all working good.